Mimaki CG-SRIII Series cutting plotters

Mimaki CG-SRIII Series cutting plotters For Sell

The Mimaki CG-SRIII Series of roll-based cutters are available in three widths. These models feature continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. Accurate long-length cutting is enabled through segment compensation. These cutting plotters are ideal for producing decals, stickers, cut-vinyl signs and more.

Highlights of the Mimaki CG-SRIII Series

• The Mimaki CG-SRIII Series roll-based cutting plotters include a number of features for producing a wide range of contour-cut pieces.

More application possibilities

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.

Continuous crop mark detection

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.

Segment compensation

Intermediate crop marks in the feed direction enable four-point corrections for each segment. This leads to accurate, long-length cutting, even if the image is distorted.

Mimaki Segment correction function

• Intermediate crop marks can be made by Fine-cut
• Half cut mechanism
• Mimaki Half cut technology
• A = Die cut (through cut)
• B = Half cut (cut through half the media)

With the proprietary half cut function, the backing sheet can be cut leaving behind a small connecting point that can be easily detached when necessary. This enables easier handling when removing the contour cut piece from the sheet.

• Mimaki_error_occurence
• Event Notification function
• Receive status messages through the email notification system for unattended operation.

What you can do with the Mimaki CG-SRIII Series

• Stickers
• Labels
• Decals
• Cut-vinyl signage
• and more…

Suitable Cutting Materials
(Colored) Vinyl, transparent PET, (transfer) paper, flock, rubber.

Technical Specs

Technical overview of the Mimaki CG-SRIII Series
Type Roll-based cutting plotter
Max media width CG-60SRIII: 29.1 inches (74 cm)
CG-100SRIII: 49.2 inches (125 cm)
CG-130SRIII: 61 inches (155 cm)
Effective cutting width CG-60SRIII: 23.8 inches (60 cm)
CG-100SRIII: 42.1 inches (107 cm)
CG-130SRIII: 53.9 inches (137 cm)
Max cutting speed 27.5” (70 cm) per second
Max moving speed 39.3” (100 cm) per second
Max downforce pressure Cutter: 10-20g (2g step), 20-100g (5g step), 100-500g (10g step)
Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)
Operational environment Temp: 41˚ – 95˚ F (5˚ – 35˚ C)
35-75% RH (non-condensing)
Connectivity RS-232, USB, Ethernet
Power supply AC100V-240V, 50/60 Hz
Dimensions (W x D x H) CG-60SRIII: 40.6 x16.9 x 46.6” (103 x 43 x 33 cm)*
CG-100SRIII: 60.2 x 22.8 x 45.3” (153 x 58 x 115 cm)
CG-130SRIII: 72 x 22.8 x 45.3” (183 x 58 x 115 cm)
*height does not include optional stand
Weight CG-60SRIII: 60 lbs. (24 kg)
CG-100SRIII: 90 lbs. (41 kg)
CG-130SRIII: 101 lbs. (46 kg)